I send a request and get no response from any API I try to hit.. if I change the HTTPS to HTTP, I get a 304 error... so something is listening.. but a good request just flashes and does nothing.
Any idea what's going on?
@Anil Sangar
hi @Anil Sagar , the specgen.apistudio seems to be down for couple of days now. can you check on that please.
THanks.
Try to run this API URL.... the "gear" flashes that it indicates it is working for just a second and then gives no response
GET https://api-rhf.relayhealth.com/v2/payerlist/hello
Running this from a Postman instance gives the following response:
{
"heartbeatResponse": "PayerSearch v2",
"status": "OK"
}
I have run this with probably 4 or 5 of our APIs and it provides the same results.
I HAVE been able to run this successfully before.
Thanks
Don
@Don Long , Looks like some kind of certificate issue with https endpoint.
Can you check into what's going on with the tool a little more?
I had our team run some checks on our side, and here is what they found:
From external the API you set as an example is accessible. I therefore believe it is an issue with their tool.
I also used a sample web service from the swagger pet store and put the URL through their tool and it worked.
So their tool is partially working.
It just does not even show that it attempted to hit us when tracing the service.
I tried the service with
https://api-rhf.relayhealth.com/v2/payerlist/hello
and it is blank via their tool.
I then logged in and put a trace on the service and from our network I can hit the service. From their tool, I see nothing in the trace as if it is blocked by a firewall.
I then went to
https://www.websitepulse.com/help/tools.php
and tried hitting the service, to which it worked.
URL tested: | https://api-rhf.relayhealth.com/v2/payerlist/hello |
Test performed from: | New York, NY |
Test performed at: | 2017-09-21 15:42:06 (GMT +00:00) |
Resolved As: | 143.112.182.12 |
Status: | OK |
Response Time: | 0.443 sec |
DNS: | 0.000 sec |
Connect: | 0.079 sec |
Redirect: | 0.000 sec |
First byte: | 0.363 sec |
Last byte: | 0.000 sec |
Size: | 52 bytes |
Were you ever able to take a look at this? I just tried again and it still does nothing with the APIs we try to run through it.
Thanks
Don
@Don Long , I have fixed same. https://api-rhf.relayhealth.com/v2/payerlist/hello should work fine now. Hope it helps.
thank you Anil, that worked fine. Question for you... this tool does one operation at a time. Is there a way to use the tool to create swagger for an entire API bundle at once? Or is there another tool to do so?
Thanks
Don
I take it back... it's not working again.
I get the following when I try to hit this URL
specgen.apistudio.io refused to connect.
ERR_CONNECTION_REFUSED
trying it this evening, it is now getting a connection timeout... and not a connection refused
specgen.apistudio.io took too long to respond.
ERR_CONNECTION_TIMED_OUT
This worked for most of today... but then quit. it was acting oddly when trying to get past the header definitions, then it quit and I am getting connection timeouts again.
Love the tool... it's really helpful... any way you could take a look at this?
Thanks
Don
It was working again. Not sure if you are fixing it each time. If so, thank you.
Now it is getting connection refused again....
I do have an issue, however, and if you could reach out to me, I would appreciate it.
While running a particular operation, I get past the first 2 steps... Run API (and it returns the expected results) Program info... but when I get to API info, I click Next and nothing happens... the little gear appears for a second to say it's working, but then it just stays there. I can't do any of the next steps.
Thanks in advance.
Don